W415-1347 / A / 03.19.15-
28
EN
DO NOT BUILD INTO THIS AREA - IT MUST BE LEFT
CLEAR TO PROVIDE ADEQUATE CLEARANCE FOR
THE VENT IN THIS 14” (356MM) WIDE AREA CENTERED
ALONG THE FRONT OF THE APPLIANCE. NO
COMBUSTIBLES ARE ALLOWED.
!
WARNING
70”
1778mm **
3 1/2”
89mm MAX
14”
356mm MIN
1 1/2”
38mm MAX
20 1/4”
514mm **
41 1/4”
1048mm **
A
NOTE: THREE BRACES ARE REQUIRED (AS
NAILERS).
4 3/4”
121mm
6 1/2”
165mm
* Allow for fi nished fl oor and hearth thickness when setting these dimensions.
** When constructing the enclosure allow for fi nishing material thickness to maintain clearances.
FRAMING DIMENSIONS
Ref HD35 HD40 HD46
A 35 3/4” (908mm) 40 3/4” (1035mm) 46 3/4” (1187mm)
To Next Page
Loading...
