RadMan 2LT/2XT 25
6 Data logger
The RadMan 2 continuously stores the exposure values for the E-field and
the H-field and adds a time stamp to each record. The recorded data can be
read out and analyzed using the PC software (see RadMan 2-TS PC soft-
ware on page 27).
The data logger begins recording automatically after the device is switched
on. A new record is created each time the device is switched on. Recording
must occur for at least 1 minute to create a record.
With the ring memory concept, older data is deleted after the maximum
storage volume is reached. Thus, storage is not limited by time. The following
table shows the available storage volumes.
RadMan 2LT RadMan 2XT
Recorded data Maximum value, average value and minimum
value of the exposure for each recording interval
and with time stamp, separate for E-field and H-
field.
The average values can be adapted to different
integration times later on.
Maximum number of
records
2,880 events 100,000 events
To Next Page
Loading...
