30 RadMan 2LT/2XT
9 Cleaning, maintenance, repair
9.1 Cleaning
9.2 Performing calibration
Narda recommends recalibrating the device after 36 months. For new
devices, this recommendation applies from the date of commissioning by the
customer. Depending on the conditions in which the device is used, you may
independently decide to define other calibration intervals.
For calibration, send the device to your Narda sales partner. You can find
the Narda sales partner responsible for you on the Narda website at
www.narda-sts.com.
NOTICE
Unsuitable cleaning methods
Solvents can damage the RadMan 2 or the charger. Water can
damage the charger.
Do not use solvents to clean the RadMan 2 and charger. As cleaning
fluid, we recommend the use of lukewarm water to which a drop of
liquid detergent has been added.
To clean the charger, use only a slightly damp cloth. Never allow water
to enter the charger.
If necessary, wipe down the still-damp device parts with a dry cloth.
To Next Page
Loading...
