7 RadMan 2-TS PC software
28 RadMan 2LT/2XT
Connecting the device to the PC software:
1. Download and install the PC software from www.narda-sts.com
(installation requires administrator rights).
2. Connect the switched-off RadMan 2 to the PC using a USB cable.
3. Open the PC software.
The connected device is automatically detected.
4. Click on the Connect icon in the PC software.
The connection to the device is established.
The content read out from data logger can be analyzed on the PC and stored
in the integrated database.
The ring memory of the data logger does not require any deletion of data. It
is, however, possible to delete the data with the Delete icon.
Live measurements are also possible with the RadMan 2.
You can find further information on using the PC software in the online
help of the PC software.
To Next Page
Loading...
