© National Instruments | A-1
A
Where to Go from Here
This section lists where you can find example programs for the cDAQ chassis and C Series
modules and relevant documentation.
Example Programs
NI-DAQmx software includes example programs to help you get started programming with the
cDAQ chassis and C Series modules. Modify example code and save it in an application, or use
examples to develop a new application, or add example code to an existing application.
To locate NI software examples, go to
ni.com/info and enter the Info Code daqmxexp. For
additional examples, refer to
ni.com/examples.
To run examples without the device installed, use an NI-DAQmx simulated device. For more
information, in Measurement & Automation Explorer (MAX), select Help»Help Topics»
NI-DAQmx»MAX Help for NI-DAQmx and search for simulated devices.
Related Documentation
Each application software package and driver includes information about writing applications
for taking measurements and controlling measurement devices. The following references to
documents assume you have NI-DAQmx 17.1 or later.
NI cDAQ Chassis Documentation
The cDAQ-9185/9189 Quick Start packaged with your cDAQ chassis, describes how to install
your NI-DAQmx for Windows software, how to install the cDAQ chassis and C Series module,
and how to confirm that your device is operating properly.
The cDAQ-9185 Specifications and cDAQ-9189 Specifications list all specifications for your
cDAQ chassis. Go to
ni.com/manuals and search for your cDAQ chassis.
The cDAQ-9185 Safety, Environmental, and Regulatory Information and cDAQ-9189 Safety,
Environmental, and Regulatory Information include important hazardous locations information,
compliance precautions, and connection information for your cDAQ chassis. Go to
ni.com/
manuals
and search for your cDAQ chassis.
The cDAQ Chassis and Controllers Calibration Procedure lists the steps for verifying the
counters on cDAQ chassis and controllers. Go to
ni.com/manuals and search for your cDAQ
chassis.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
