4-8 | ni.com
Chapter 4 Analog Output
Using the Watchdog Timer
You can use the watchdog timer for analog output operations. Refer to the Watchdog Timer
section of Chapter 1, Getting Started with the cDAQ Chassis, for more information.
Getting Started with AO Applications in Software
You can use the cDAQ chassis in the following analog output applications:
• Single-point (on-demand) generation
• Finite generation
• Continuous generation
• Waveform generation
For more information about programming analog output applications and triggers in software,
refer the LabVIEW Help or to the NI-DAQmx Help.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
