EasyManua.ls Logo

NBS Technologies Advantage M8 - Eco Mode

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Eco mode
1. This product has the following two different type Eco (Economy Energy) mode. Each mode can be set
independently.
Tipper Heater OFF
Motor OFF
2. Eco mode can be set for the heater and motor as follows:
i. No ( Not change to Eco Mode)
ii. 10 minutes (When the machine has been kept on standby for 10 minutes or more, it shifts to the Eco
mode )
iii. 30 minutes (When the machine has been kept on standby for 30 minutes or more, it shifts to the Eco
mode )
iv. 60 minutes (When the machine has been kept on standby for 60 minutes or more, it shifts to the Eco
mode )
Factory default setting is “No” for both of Hopper and Motor
3. During Eco mode, the following message will be indicated on the Main display.
Eco mode Tipper
Tipper is in Eco mode.
Eco mode Motor
Motor is in Eco mode.
Eco mode Both
Both Tipper and Motor are in Eco mode.
4. Eco mode is canceled by receiving “Clear Eco Mode” command from the host computer.

Related product manuals