Continued from Product Handling
Product Installation
Do not wipe with benzene, solvents or thinner. It may cause discoloration or deformation
of this machine. For heavy contaminents, apply dilute mild detergent to a cloth, wring it
thoroughly, then wipe off the contaminents with it, finally wipe with a dry, soft cloth.
Never open the covers of this machine during operation.
It may cause injury.
Caution
When not using for a long period, be sure to pull the power plug out of the outlet.
Failure to do so may cause a fire.
When pulling out the power plug, hold the tip of the power plug.
Failure to do so may cause an electric shock.
Do not use a card contaminated with dirt or flaws.
It may cause a breakdown.
Caution
Ensure a good electrical ground is established.
Failure to do so may cause an electric shock.
Only connect cables when the host computer and this machine are turned off.
Do not insert the power plug into the outlet until the connection is completed.
LAN connector and USB connector are sensitive to ESD.
Connect these communication cables when the machine is powered off.
Avoid installing in a place with extremely high temperatures/humidity or a place with rapid
humidity changes. It may cause condensation, resulting in a breakdown or improper
o
eration.
Avoid installing in a place with an unstable base or a where the surface is not flat place.
It may interfere with proper operation or fall, resulting in injury.
Avoid installing in a place with heavy vibration.
It may interfere with proper operation.
Avoid installing in a dusty place.
It may cause a breakdown.
Avoid installing in direct sunlight or near to a bright light source or a window.
It may interfere with proper operation.
Power supply connection of this product should be done by a technician with necessary
knowledge and qualification. It may cause electric shock or fire.
To Next Page
Loading...
