42
Removing the card remaining in Emboss Unit
1. Turn the power OFF, and open the Right side door by turning the key clockwise.
Open the Top Cover by turning the key clockwise.
（Card is remaining between emboss type in Emboss Unit.）
* In the case when the card is
remaining in Emboss Unit
and held by Needle lever of
Carriage Unit, remove the
card from the Carriage by
opening the needle lever as
shown on page 40 in this
manual.
Emboss Unit
Open Right side door
Turn this key clockwise
Emboss Unit
Remaining
Card
Open Top Cover Turn this key clockwise
Remaining Card
Emboss Type
To Next Page
Loading...