EasyManua.ls Logo

NBS Technologies Advantage M8 - Error Reset: Carriage Unit Card Retrieval; Opening Needle Lever for Card Removal; Tipper Unit High Temperature Caution

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
41
3. Open needle lever by pushing shaft with holding the remaining card.
Remove the card from the Carriage Unit.
* Be careful not to drop the card into the machine (Unless holding the card, it will drop into the machine
when needle lever is opened).
4. Close Top Cover and lock by the key.
Carriage Unit
Remaining
Card
Open Needle Lever by pushing the shaft
Needle Lever
Shaft
Push the shaft backward
with holding the card
Tipper Unit has a very high-temperature part.
If you make the above process, turn off the power and wait at least 1 hour until the Unit has
been completely cooled down to prevent your arms or hands from getting burned.
Caution

Related product manuals