NCR 5965 - Horizontal Positioning; Vertical Positioning

3-18 Chapter 3: Hardware Installation
Horizontal Positioning
This control is used to adjust the position of the picture left or right on the screen. Select
Horizontal Position from the sub-menu. The (+) button increases the value and moves the
screen right. The (-) button decreases the value and moves the screen left.
1024x768@100 Hz
Digital
Exit
Setup
Picture
Colour
OSD
System
Horizontal Position
50
To exit this screen and return to the OSD menu, press the Menu button.
Vertical Positioning
This control is used to adjust the position of the picture up or down on the screen. Select
Vertical Position from the sub-menu. The (+) button increases the value and moves the
screen up. The (-) button decreases the value and moves the screen down.
1024x768@100 Hz
Digital
Exit
Setup
Picture
Colour
OSD
System
Horizontal Position
50
To exit this screen and return to the OSD menu, press the Menu button.