Chapter 6: Maintenance
Cabinet and Screen Cleaning Procedures
NCR touch screen terminals are designed for general retail applications. These products are
resistant to spills and dust. However, these products are not spill proof or dust proof.
To maintain proper operation, users should prevent water, beverages, or cleaning agents from
being introduced into the unit during storage, operation, or cleaning.
To clean your terminal, use the following procedures:
1. Disconnect the unit from the power outlet before cleaning.
2. Use a soft cloth dampened lightly with a mild non-abrasive soap & water solution or 70%
Isoprop
y
l Alcohol.
3. Gently wipe the subject area clean.
4. Wipe the damp areas dry. Make sure the glass and touch screen edges are completely dry
before using t
h
e unit.
5. Avoid getting any liquids inside the unit. If liqui
d doe
s get inside, have a qualified service
technician check it before you power it on again.
Cleaners/Solvents to Use
Use the following cleaner/solvents to clean the unit.
Mild Non-Abrasive Soap and Water Solution
or
70% Isopropyl Alcohol
6
To Next Page
Loading...