NCR P1535 - Cash Drawer (CD) Port

2-32 Installation Notes and Restrictions
Cash Drawer (CD) Port
A single 6-position RJ12 connector (Molex 44248-0065 or NCR approved equivalent) is
used.
Pin Diagram Pin SignalName
1 LOGICGND
2 SOLENOIDA
3 OPEN/CLOSESTATUS
4 +24V
5 SOLENOIDB
6 POWERGND
Cash Drawer Cable Kits
The terminal supports a 2–drawer configuration with a Dual Cash Drawer Cable.
Connect this cable to the terminal or transaction printer cash drawer connector.
Note: When connecting a single 12 V legacy cash drawer, the 1432–C517–0009 cable is
required to be used.
Caution: The two cables look very similar. Make sure you use the correct one.
Connecting the wrong cable can cause system damage.
Cash Drawer Cable Kits
1432–C516–0009 (24V) 24V CashDrawer Cable Splitter
1432–C517–0009 (12V) 12V CashDrawer Cable Splitter