Chapter 2: Hardware Installation
Installation Restrictions
• Install the NCRP1535 POS near an electrical outlet that is easily accessible. Use the
power cord as a power disconnect device.
• Do not permit any object to rest on the power cord. Do not locate the NCRP1535
POS where the power cord can be walked on.
• Use a grounding strap or touch a grounded metal object to discharge any static
electricity from your Body before servicing the NCRP1535 POS.
Warning: This unit contains hazardous voltages and should only be serviced by
qualified service personnel.
Caution: Do not connect or disconnect the transaction printer while the terminal is
on. This can result in system or printer damage.
To Next Page
Loading...
