Installation Notes and Restrictions 2-17
Magnetic Strip Reader (MSR) Cleaning
Periodically, the MSR may need to be cleaned depending on usage. Pre-saturated MSR
cleaning cards can be ordered from NCR (50/box) using part number 1666-K024.
Otherwise, wrap a card with a saturated paper towel of glass cleaner and swipe gently to
clean reader head.
Biometric Cleaning
Periodically, the biometric reader may need to be cleaned depending on usage.
For this optical reader, it is recommended to apply the sticky side of a piece of adhesive
cellophane tape to the window, and then peel it away. This works best and avoids
chemicals which may damage the material. An alternative is to use any type of
household cleaner, such as Formula 409, Fantastic, Windex, etc. Use a soft rag, cotton
swab, or something non-abrasive to gently clean the reader surface. Do not use alcohol-
based cleaners. Always spray the cleaner on the rag or swab first to avoid liquid pooling
around the reader. Remove the excess liquid.
Do not to use chlorine based cleaners, such as Clorox bleach, non-chlorine bleach, or
chlorine based bathroom / mildew cleaners. Also, do not use solvents such as acetone,
MEK, TCE, paint thinner, or turpentine. The power should be removed from the
terminal prior to cleaning.
Hardware Platform Drivers
Platform drivers for the P1535 POS are available on http://www5.ncr.com/support/.
To Next Page
Loading...
