NCR RealPOS 50 - Page 155

Appendix A: Display Color Adjustment
Ifyouaremigratingfromlegacyterminalsyoumayfinditnecessarytoadjustthe
colorsonthedisplaytomatchthecolorsontheolderterminals.Thisisduetothe
changesindisplayhardwareanddrivertechnology.Usethefollowingprocedureto
changethecolors.Theproceduresarethe
sameforWindowsXPandWindows7
exceptforthescreens.Bothscreensareshown.
1. Applypowertothesystem.
2. RightclicktheDesktopandthenselectGraphicsPropertiesfromthemenuto
startthecontrolpanel.Bothdisplaysshouldberecognized.
3. SelectColorCorrectiononaWindowsXPsystemorColor
Enhancementona
Windows7system.
WindowsXP