NCR RealPOS 50 - Chapter 2: Hardware Installation; Installation Restrictions

Chapter 2: Hardware Installation
ThischapterexplainshowtoinstalltheRealPOS50hardware,includingout‐of‐box
installationandhowtoinstalltheoptionalperipheraldevices.
Installation Restrictions
•BeforeinstallingtheRealPOS50,readandfollowtheguidelinesintheRealPOS50
SitePreparationGuide(B005‐0000‐2035)andtheNCRWorkstationandPeripheralAC
WiringGuide(BST0‐2115‐53).
•InstalltheRealPOS50nearanelectricaloutletthatiseasilyaccessible.Usethe
powercordasapower
disconnectdevice.
•Donotpermitanyobjecttorestonthepowercord.DonotlocatetheRealPOS50
wherethepowercordcanbewalkedon.
•Useagroundingstraportouchagroundedmetalobjecttodischargeanystatic
electricityfromyourbodybeforeservicingtheRealPOS50.
Caution: Thisunit
containshazardousvoltagesandshouldonlybeservicedby
qualifiedservicepersonnel.
Caution: Donotconnectordisconnectthetransactionprinterwhiletheterminalis
on.Thiscanresultinsystemorprinterdamage.