NCR RealPOS 50 - Disconnecting the Power Cable

2-12 Hardware Installation
Table-Top Stand w/Power Supply Enclosure
AnoptionalstandisavailablethathasanenclosureforthePowerSupply.Seethe
Table‐TopStandAssemblyw/PowerSupplyEnclosureKitInstructions(7610‐K321).
Disconnecting the Power Cable
ThePowerCableconnectorlocksintopositionwhenconnectedtotheterminaland
cannotberemovedbysimplypullingonthecable.Youmustgrasptheconnectorand
slidetheoutsidehousingoutfromtheterminaltounlockitfromtheterminal
connectortoremoveit.
31805
Terminal Power Cable
29249