NCR RealPOS 50 - NCR 5942 15-Inch LCD Monitor Cable Connections; NCR 5964 12.1-Inch LCD Touch Monitor Cable Connections

Hardware Installation 2-17
NCR 5942 15-Inch LCD Monitor Cable Connections
The15‐Inch5942LCDreceivesvideothroughtheVGAinterface.Itreceivespower
fromanACpowersource.
1.ConnecttheVideoCablefromthe5942totheVGAconnectoronthehostterminal.
2.ConnecttheACPowerCordtothe5942.
NCR 5964 12.1-Inch LCD Touch Monitor Cable Connections
Therearetwocablesrequiredtoconfigurea596412.1‐InchTouchLCD.
•DVICable‐providesthevideointerfacetothe5964LCD
•RS‐232Y‐Cable‐providesaserialinterfaceandpowertothe5964LCD.Italso
connectsthe5964PS/2keyboardconnectortothehostterminal,whichprovidesan

interfaceforthewedgecontroller(MSR,PS/2Keyboard,Scanner,andTone
Speaker).
29225a
VGA
AC Power Cord
(Country Specific)
AC
VGA
497-0435044 - 1 m
1416-C972-0010
497-0435045 - 4 m
(1416-C972-0040)
Power