NCR RealPOS 50 - Connecting AC Power; Power Supply Bracket

Hardware Installation 2-11
Connecting AC Power
The7611receivespowerfromanexternal24Vpowerbrick.
Caution: The7611requirestheNCR24Vpowersupplythatisshippedwiththe
terminal.Useofotherpowerbricksmaycausedamagetotheunit.
1. ConnectthePowerSupplycabletotheDCPowerconnectorontheterminal.
2. Connectthe
ACPowerCordtothePowerSupplyandtoanACoutlet.
Caution: Donotconnectordisconnectthe24VPowerCablefromtheterminal
withtheACPowerCordconnectedtoanACoutlet.
Power Supply Bracket
Anoptionalpowersupplybracketisavailabletomountthepowersupplyonavertical
surfaceorunderatabletop(seetheWallMountPowerSupplyBracketKitInstructions
(7600‐K310).
29247
AC Power Cord
(Country Specific)
28772
7600 Wall Mount Power Supply Bracket
497-0469772