NCR RealPOS 50 - Installing the Terminal

2-2 Hardware Installation
Installing the Terminal
Theterminalcanbemountedusingavarietyofmounts.
•TableTopStand(7610‐K320)
• CheckstandMount(5964‐K039
•WallMount(7409‐K502)
•IntegratedwithperipheralsusingtheIntegrationTrayKit(7610‐K304).
ThisdocumentdescribeshowtoinstalltheterminalontheTableTopStand.Forthe
othermountingoptionsseethe
associatedkitinstructions.
1. Unpacktheterminalinthedesiredlocation.
2. Laytheterminalfacedownonaflatsurface.
Caution: Thefrontbezelisapaintedcomponentandtheweightoftheterminal
cancauseabrasionswhenmovedaroundonasurface.Alwaysuseasoftmaterial
(cloth,foam)toprotectthe
bezelwhenplacingtheterminalfacedown.
29241
Protective Foam or Cloth