NCR SelfServ 28 ATM Site Preparation
30 B006-6884-A000
Card Orientation Window
If the window next to the Card Reader entry/exit slot is to be customised to indicate card
orientation, the card/decal to be inserted into the window should be of the following
dimensions.
The card/decal should be a maximum of 0.75 mm (0.029 in.) thick.
Note . An industry standard credit card can be placed behind the card orientation window.
54 mm
(2.13 in.)
85.6 mm
(3.37 in.)
R (0.20 in.)5mm
To Next Page
Loading...
