EasyManuals Logo

NEC Aspire Cordless II Product Description

NEC Aspire Cordless II
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Section 2: Components
12 Product Description
The 64-port basic CPU (P/N 0891002), with the basic factory-installed PAL chip, provides:
64 ports maximum for trunks and extensions
64 ports maximum for the NEC Wireless 2.4 GHz and IP Phones
256 virtual extensions
Supports the 4VOIPU PCB and 4VOIPDB
The 64-port basic CPU, with the basic factory-installed PAL chip, does not support:
The 64-port basic CPU (P/N 0891002), with the Feature Upgrade PAL chip, provides:
4 ports maximum for trunks and extensions
64 ports maximum for the NEC Wireless 2.4 GHz and IP Phones
256 virtual extensions
Supports the 4VOIPU PCB and 4VOIPDB
The 64-port basic CPU, with the Feature Upgrade PAL chip, supports:
The enhanced CPU (P/N 0891038), with the Feature Upgrade PAL chip, provides:
200 trunk ports maximum
256 extension ports maximum
512 ports maximum for the NEC Wireless 2.4 GHz and IP Phones
256 virtual extensions
Supports the 4VOIPU PCB and 4VOIPDB
The enhanced CPU, with the Feature Upgrade PAL chip, supports:
The NTCPU provides the following:
Five diagnostic LEDs which indicate the status of various system functions
During normal operation, the “RUN” LED will be flashing and the remaining LEDs will be off.
1019x1019 Time Division Multiplex Switch (TDM Switch)
Digital Phase Locked Loop (DPLL)
Tone Generator
DTMF Tone Sender
32 Tone Resources (for DTMF Receiver, Caller ID Receiver, and Call Progress Tone Detection)
System Tone Sender
MFC Tone Sender
Expansion Cabinet Third-Party CTI PRI Trunks
DSPDB Daughter Board (limiting the
DTMF Receiver, Call Progress Tone Detec-
tion and Caller ID Receivers to 32 channels)
16VOIPU PCB
and 16VOIPDB
E&M Trunks
ACD T1 Trunks Networking
Expansion Cabinet Third-Party CTI PRI Trunks
DSPDB Daughter Board (limiting the
DTMF Receiver, Call Progress Tone Detec-
tion and Caller ID Receivers to 32 channels)
16VOIPU PCB
and 16VOIPDB
E&M Trunks
ACD T1 Trunks Networking
Expansion Cabinet Third-Party CTI PRI Trunks
DSPDB Daughter Board (expanding the
DTMF Receiver, Call Progress Tone Detec-
tion and Caller ID Receivers to 64 channels)
16VOIPU PCB
and 16VOIPDB
E&M Trunks
ACD T1 Trunks Networking

Table of Contents

Other manuals for NEC Aspire Cordless II

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC Aspire Cordless II and is the answer not in the manual?

NEC Aspire Cordless II Specifications

General IconGeneral
BrandNEC
ModelAspire Cordless II
CategoryTelephone
LanguageEnglish

Related product manuals