NEC DT820 - Make a Call from Directory; Delete All Directory Data

120
Make a Call From Directory
5. Display the detailed data for a target party (see
Find Registered Data).
The following display is an example of dial by name.
6. Lift the Handset, press Speaker or press the Dial
softkey while displaying the detailed data for target
party on LCD.
Note:
If multiple telephone numbers are assigned
into a target party, a call is made to the first
telephone number.
Delete All Directory Data
1. Display the main directory screen.
2. To delete all the registered data, press the Enter
Key or 4: Softkey to delete all the data.
Below is a sample display of a deleted number.
3. After 4-digit password is entered (Default = 0000),
the display asks if you want to delete all the
Directory data. To delete, press Yes.
4. After the appropriate Directory data is deleted, the
display changes as follows:
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]
Name:Abe Shintaro
[Detail]