NEC DT820 - Set Music on Hold

43
1.
STEP 5: Select Automatic, No Tone,
Tone or Voice.
Select an item by one of the following operations.
• Highlight an item by using , and press
or OK.
• Press - , and press or OK.
Note: When Automatic is set, the default setting (Tone) is
applied.
• Set Music on Hold
The procedure below shows how to set Music on
Hold to be heard by DT820 user.
STEP 1: Display the Menu screen, select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 3: Select Talk.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
0
1
2
3
0
3
0
1
2
3
OK
Back

1/1
[Key Touch Tone]
No Tone
Tone
Automatic
Voice
1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
2
2
OK
Back
1/1
[User Setting]
1
2
3
4
5
6

Display
Change Password
Security
Incoming Call
Talk

0
Setting Reset
Usability