NEC DT820 - Backup Personal Settings

74
1.
Note: While “Saving...” is displayed on the LCD, do not to
power OFF the DT820.
STEP 23: When the downloading process
completes, the following is displayed.
STEP 24: The display returns to the Download
Files screen upon Exit.
Note:
When the downloading process ends in failure,
Downloading Failed! is displayed on the LCD. Check
the following and retry.
• Backup Personal Settings
You can backup personal settings of DT820 to FTP/
TFTP/HTTPS server. To back up the setting data,
the DT820 needs to be connected to the network
that has FTP/TFTP/HTTPS server).
Note:
For details on the XML service, contact the System
Administrator.
STEP 1: Set up the FTP/TFTP/HTTPS server.
<FTP server>
Confirm the designated directory (for
Windows IIS, the default is
“C:\InetPub\ftproot”) for the backed up file.
<TFTP server>
Specify a desired destination directory for
the backed up file.
<HTTPS server>
Specify a desired destination directory for
the backed up file.
STEP 2: Display the Menu screen, select Setting.
STEP 3: Select Data Backup/Restore.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
Check Points Actions
Download file is not placed in
the specified directory.
Place the download file in the
specified directory.
A different file name is
specified between DT820 and
FTP/TFTP/HTTPS server.
Set the same file name from
both DT820 and FTP/TFTP/
HTTPS server.
Incorrect IP address of FTP/
TFTP/HTTPS server has been
entered from the telephone.
Set the proper IP address of
FTP/TFTP/HTTPS server.
The power to FTP/TFTP/
HTTPS server or network
equipment is Off.
Turn On the power.
LAN cable is disconnected. Reconnect the cable securely.
Exit
Download Complete!
3
3