STEP 4: Select Protocol.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 5: Choose a protocol used by the destination
server.
Select an item by one of the following operations.
• Highlight an item by using , and press
or OK.
• Press , , or and press or OK.
STEP 6: The display returns to the Backup/
Restore screen.
If FTP is selected, continue to with
STEP 7.
If TFTP is selected, proceed to
STEP 15.
If HTTPS is selected, proceed to
STEP 7.
STEP 7: Select Account Settings.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
To Next Page
Loading...
