NEC DT820 - Change Character Size

51
1.
STEP 5: Select a desired brightness level.
Select an item by one of the following operations.
• Highlight an item by using , and press
or OK.
• Press - , and press or OK.
• Change Character Size
The following steps show how to change the
displayed character size on the LCD.
STEP 1: Display the Menu screen, select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 3: Select Display.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
• Press .
TIP
Default setting is Level 3.
TIP
The enabled item is highlighted.
1
4
1
2
OK
Back

1/1
3
Level 1 (Bright)
Level 3
[Back Light]
4
Level 4 (Dark)
Level 2

1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
3
3
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
0

Change Password
Security
Incoming Call
Talk

Display
Setting Reset
Usability