NEC DT820 - Set Character Font Color (TY-8 LCGX-1 Only)

55
1.
STEP 5: Select Wallpaper.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 6: Choose either Default or
Download.
Select an item by one of the following operations.
• Highlight an item by using , and press
or OK.
• Press or , and press or OK.
Note: When choosing Download, the wallpaper file must be
downloaded in advance. If there is no downloaded file, the
wallpaper is default.
• Set Character Font Color (TY-8LCGX-1
Only)
The following steps show how to set the displayed
character color on the LCD.
Note:
Font characters are displayed in LCD 4-line display area.
Note: ITZ-12DG-3 does not support Font Color setting.
STEP 1: Display the Menu screen, select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using , and press ,
or OK.
• Press .
1
1
Back
OK
1
2
[Advanced]
3
Wallpaper
1/1
4
5
Font Color
Home Frame
Turn Off Display
Backlight Fade Control
1
2
1
2
1

1/1
OK
Back
Default
2
Download
[Wallpaper]
TIP
Default setting is Default.
TIP
The enabled item is highlighted.
1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1