NEC DT820 - To Dial a Group Speed Dialing Number; To Dial a System Speed Dialing Number

90
To dial a System Speed Dialing number:
1. Press the Speaker key.
2. Dial #2 (default Service Code).
-OR-
3. Press the Redial key.
-OR-
Press the System Speed Dialing key (Service
Code 751:27).
Note:
To preselect, press a Line key in step 1 (instead
of pressing Speaker).
4. Dial the Station Speed Dial buffer number (Default:
000~999).
The stored number dials out.
Note 1:
Initially (at default), there are 1000 System
Speed Dial buffers.
Note 2: Unless you preselect, Trunk Group Routing
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
Note 3: If you have a DSS Console, you may be able to
press a DSS Console key to chain to a stored
number.
To dial a Group Speed Dialing number:
1. Press the Speaker key.
2. Dial #4 (default Service Code).
-OR-
Press the Redial key.
-OR-
Press the Group Speed Dialing key (Service Code
751:28).
Note:
To preselect, press a Line key in step 1 (instead
of pressing Speaker).
3. Dial the Group Speed Dial buffer number (none at
default).
Note 1:
Initially, there are no Group Speed Dial
buffers assigned.
Note 2: Unless you preselect, Trunk Group Routing
selects the trunk for the call. The system may
optionally select a specific Trunk Group for
the call.
Note 3: If you have a DSS Console, you may be able to
press a DSS Console key to chain to a stored
number.
92142622000 NEC
2-13 WED 5:28PM
Conf Rpt Save Trf