NEC Express5800 Series Installation Guide

1. Information of Windows Installation
Installation Guide (Windows Server 2022)
14
Chapter 1 Installing Windows
1.1
Starting EXPRESSBUILDER
Use EXPRESSBUILDER to reconfigure RAID arrays.
For details, see Chapter 1 (4. Details of EXPRESSBUILDER) in Maintenance Guide (Common).
Usage
Remove a CD/DVD and removable media from the server, restart the server and press <F10> key
(EXPRESSBUILDER) during POST.
1.2
Supported Windows OS
You can install the following editions of Windows operating system.
: Rapid Setup
: Manual installation
Name of Windows OS
Boot mode Installation method
UEFI Legacy
Windows Server 2022
＊
Standard

N/A N/A

Datacenter

N/A N/A

 : Supported
＊
〝Nano Server″is not supported.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)