NEC Express5800 Series Installation Guide

3. Installing Windows Server 2022
Installation Guide (Windows Server 2022)
41
Chapter 1 Installing Windows
3.4.7
Using 480GB SSD Adapter for OS Boot (N8103-239)
The driver for the 480GB SSD Adapter for OS Boot (N8103-239) is automatically installed by Windows
Plug-and-Play.
3.4.8
Using Fibre Channel Controller (N8190-163/164/165/166/171/172)
For installation with the Rapid Setup or Manual installation, the drivers are installed by Standard Program
Package. If you install the Fibre Channel Controller (N8190-163/164/165/166/171/172) after installing
Standard Program Package, install Standard Program Package again according to Chapter 1 (3.3 Standard
Program Package Installation).

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)