NEC Express5800 Series Installation Guide

3. Installing Windows Server 2022
Installation Guide (Windows Server 2022)
26
Chapter 1 Installing Windows
3.2.2
Requirements for Setup
Prepare the following media and instruction manuals before starting setup.
 Either of the following OS installation media
 NEC operating system installation media (hereafter referred to as Backup DVD-ROM)
 Microsoft operating system installation media (hereafter referred to as Windows Server 2022
DVD-ROM)
 Starter Pack
 Starter Pack DVD (Optional or downloading from our website)
→ The Starter Pack which supports Windows Server 2022 is "S8.10-010.01" or later.
Download it from Web site.
3.2.3
Installation procedure
Note
Read the precautions in Chapter 1 (3.1 Precautions of Windows Server 2022
Installation) in advance.
1. Turn on peripherals (such as a display), and then turn on the server.
Insert OS installation media into the drive.
2. To run EXPRESSBUILDER, press <F11> key during POST.
On the One-Time Boot Menu, select the optical disk drive in which the OS installation media was
inserted.
3. The system starts from the OS installation media
he message “Press any key to boot from CD or DVD…” is displayed on the upper of the screen.
Press the <Enter> key to start from the media.
Note
If the Windows Setup screen (the screen in the next step) does not display, the
<Enter> key was not properly pressed. Turn the system power on again, and then
start again.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)