NEC Express5800 Series - Supported Mass Storage Controllers

1. Information of Windows Installation
Installation Guide (Windows Server 2022)
15
Chapter 1 Installing Windows
1.3
Supported Mass Storage Controllers
The table below lists the controllers for this server, supported by EXPRESSBUILDER/Starter Pack.
If a controller not mentioned below is connected, set it up while referring to the instructions supplied with the
controller.
R120i-1M R120i-2M
RAID controller supporting the installation of OS at EXPRESSBUILDER
N8103-189 RAID Controller (RAID 0/1)
 
N8103-190 RAID Controller (2GB, RAID 0/1/5/6)
 
N8103-191 RAID Controller (4GB, RAID 0/1/5/6)
 
N8103-192 RAID Controller (RAID 0/1)

N/A
N8103-193 RAID Controller (2GB, RAID 0/1/5/6)

N/A
N8103-194 RAID Controller (4GB, RAID 0/1/5/6)

N/A
N8103-195 RAID Controller (RAID 0/1)
 
N8103-201 RAID Controller (2GB, RAID 0/1/5/6)
 
N8103-237 RAID Controller (4GB, RAID 0/1/5/6)
 
N8103-238 RAID Controller (8GB, RAID 0/1/5/6)
 
N8103-239 480GB SSD Adapter for OS Boot (RAID 1)
 
RAID controller supporting the installation of OS at EXPRESSBUILDER
N8103-184/E184 SAS Controller
 
N8103-197 SAS Controller
 
N8190-163 Fibre Channel Controller (1ch)
 
N8190-164 Fibre Channel Controller (2ch)
 
N8190-165 Fibre Channel Controller (1ch)
 
N8190-166 Fibre Channel Controller (2ch)
 
N8190-171 Fibre Channel Controller (1ch)
 
N8190-172 Fibre Channel Controller (2ch)
 
: Supported