NEC Express5800 Series Installation Guide

4. Setting up for Maintenance
Installation Guide (Windows Server 2022)
52
Chapter 1 Installing Windows
4.
Setting up for Maintenance
We recommend setting up the following features for maintenance.
4.1
Specifying Memory Dump Settings (Debug Information)
This section explains the procedures for collecting a memory dump (debug information) in the server.
Important
When you restart the system to save the memory dump, a message
informing you that the system is short of virtual memory might appear.
Ignore this message and proceed with the restart. If you reset or restart the
system again, the memory dump might not be saved normally.
1. Right-click the left bottom of screen, and click System from the menu displayed.
2. Click Advanced system settings.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)