NEC Express5800 Series Installation Guide

4. Setting up for Maintenance
Installation Guide (Windows Server 2022)
53
Chapter 1 Installing Windows
3. In Startup and Recovery, click Settings….
4. Type a file name to store the debug information in the Dump file text box, and then click OK.
Note the following when specifying a dump file:
 We recommend specifying Kernel memory dump for Write debugging information.
 Specify a drive that has free space of "installed memory size + 400 MB"("installed memory size +
1,800 MB" when the installed memory size is 4TB or more) or more.
 The size of the debug information (memory dump) changes if DIMM is added. Make sure that the
free space of the drive to store the debug information (memory dump) is sufficient.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)