5-4
Problem Solving
■ Are all DIMMs fully seated and installed correctly?
Refer to the Upgrades and Options chapter for
installation instructions.
■ Are all option boards and disk drives installed
correctly? Refer to the Upgrades and Options
chapter.
■ If the system has a hard disk drive, is it properly
formatted or defined?
■ Is the operating system properly loaded? Refer to
the operating system documentation.
■ Are all drivers properly installed? For information
about installing drivers, refer to your network
operating system configuration guide.
■ Are the configuration settings in Setup and the
Resource Configuration Utility (RCU) correct? For
information about running these utilities, refer to
the Configuring Your System chapter.
If the above items are all correct, but the problem
reoccurs, refer to Additional Troubleshooting
Procedures in this chapter.
To Next Page
Loading...
