5-18
Problem Solving
Problems with Application Software
If you have problems with application software, perform
the following:
■ Verify that the software is properly configured for
the system. Refer to the software installation and
operation documentation for instructions on setting
up and using the software.
■ Verify a different copy of the software to see if the
problem is with the copy you are using.
■ Make sure all cables are installed correctly.
■ Verify that the system board jumpers are set
correctly. Refer to the Configuring Your System
chapter for jumper settings.
■ If other software runs correctly on the system,
contact your vendor about the failing software.
If the problem persists, contact the software vendor's
customer service representative for assistance.
To Next Page
Loading...
