NEC LE2200 - Page 42

3-14
Configuring Your System
Table 3-5. BIOS Setup Configurations (Continued)
MENU PARAMETER NAME DEFAULT SETTING
OR DISPLAY ONLY
YOUR
CONFIGURATION
DIMM J20 - Row #1 Status Normal
Row #2 Status None
DIMM J19 - Row #3 Status None
Row #4 Status None
DIMM J18 - Row #5 Status None
Row #6 Status None
DIMM J17 - Row #7 Status None
Row #8 Status None
Memory Row Errors Clear Press ENTER
Memory Configuration Message Enabled
Memory Warning POST Error Enabled
CPU Reconfiguration
Press ENTER for menu.
CPU Reconfigure Enabled
CPU #1 Status Normal
CPU #2 Status None
Clear CPU Errors Press ENTER
CPU Error Pause Enable
**SMB Configuration
Press ENTER for menu.
ITF Monitoring Observation OptROM - END
Boot Monitoring Disabled
Boot Monitoring timeout period 5
Advanced Chipset Control
Press ENTER for menu.
DRAM Speed 60ns
DMA Aliasing Enabled
8-bit I/O Recovery 4.5
16 bit I/O Recovery 4.5
Use Mutiprocessor Specification
1.4
** Reserved for future use.