3-17
Configuring Your System
2. Insert the Utilities diskette into floppy disk drive A.
At the C:\prompt type:
SYS A:
Press ENTER. MS-DOS system files are copied onto
the diskette. Your Utilities diskette is now bootable.
3. Reboot the system with the Utilities diskette in
Drive A.
4. The MS-DOS Startup Menu displays. See Table 3-6.
Table 3-6. MS-DOS Startup Menu
MENU OPTIONS DESCRIPTION
1. Read the System Event
Log.
Executes the Log Display Utility which
displays any events stored in the system
log area.
2. Execute AIC-78xx
SCSISelect Utility.
Loads the SCSISelect Utility and displays
the current configurations.
3. Exit to DOS. Exits Utilities and returns to A: prompt.
To Next Page
Loading...
