NEC NP610 - Adjusting from the Menu

35
3. Projecting an Image (Basic Operation)
Adjusting from the menu
1. Press the MENU button.
The menu will be displayed.
2. Press the  button to select [SETUP] and press the ENTER button.
The [GENERAL] screen will be displayed.
3. Press the  button to select [KEYSTONE].
4. Press the  or  button.
Adjust so that the image is rectangular.
5. After completing adjustment, press the EXIT button three times.
The menu will be closed.
NOTE:TheKeystonecorrectioncancauseanimagetobeslightlyblurredbecausethecorrectionismadeelectronically.
TIP:Thechangescanbesavedwith[KEYSTONESAVE].(→ page 36, 68)