NEC PX2000UL Command Reference Manual

©NEC Display Solutions, Ltd. 2014-2020 14
<Error information list>
Item
Description
DATA01 Error status (1)
Bit0 Cover error Bit4 Fan error
Bit1 Temperature error (bi-metallic
strip)
Bit5 Power error
Bit2 None (fixed to 0) Bit6 Lamp (or lamp 1) off
or backlight off
Bit3 Fan error Bit7 Lamp (or lamp 1) in a replacement
moratorium
DATA02 Error status (2)
Bit0
Lamp (or lamp 1
) usage time
exceeded the limit
Bit4 None (fixed to 0)
Bit1 Formatter error Bit5 None (fixed to 0)
Bit2 Lamp 2 off Bit6 None (fixed to 0)
Bit3 None (fixed to 0) Bit7 Refer to the extend status.
DATA03 Error status (3)
Bit0 None (fixed to 0) Bit4 Lamp (or lamp 1) data error
Bit1 FPGA error Bit5 Mirror cover error
Bit2
Temperature error (temperature
sensor)
Bit6
Lamp 2 in a replacement
moratorium
Bit3 Lamp (or lamp 1) not present Bit7
Lamp 2 usage time exceeded the
limit
DATA04 Error status (4)
Bit0 Lamp 2 not present Bit4 None (fixed to 0)
Bit1 Lamp 2 data error Bit5 Ballast communication error
Bit2 Temperature error due to dust Bit6 Iris calibration error
Bit3 Foreign matter sensor error Bit7 The lens is not installed properly.
DATA05 - 08 Reserved for the system
DATA09 Extended status
Bit0 The portrait cover side is up Bit4 None (fixed to 0)
Bit1 The interlock switch is open. Bit5 None (fixed to 0)
Bit2 System error has occurred.
(Slave CPU)
Bit6 None (fixed to 0)
Bit3 System error has occurred
(Formatter)
Bit7 None (fixed to 0)
DATA10 - 12 Reserved for the system

NEC PX2000UL Specifications

General

Brand	NEC
Model	PX2000UL
Category	Projector
Language	English