©NEC Display Solutions, Ltd. 2014-2020 77
3.47 [ 098-45. LAN PROJECTOR NAME SET ]
Sets the projector name.
Command
03h B1h 00h 00h 12h 2Ch <DATA01> - <DATA16> 00h <CKS>
Data part
Item Description
DATA01 - 16 Projector name (up to 16 bytes)
Response
When the command succeeds
23h B1h <ID1> <ID2> 02h 2Ch <DATA01> <CKS>
Data part
Item Description
DATA01 Execution result
00h Ended successfully.
01h Ended with an error.
When the command fails
A3h B1h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>
To Next Page
Loading...
Need help?
General
