©NEC Display Solutions, Ltd. 2014-2020 76
3.46 [ 098-8. ECO MODE SET ]
Sets the eco mode.
Information
Depending on the projector, the "Light mode" or "Lamp mode" will be set.
Command
03h B1h 00h 00h 02h 07h <DATA01> <CKS>
Item Description
DATA01 Value set for the eco mode
Information
For information about the values set for the eco mode, see the Appendix "Supplementary Information by
Command".
Response
When the command succeeds
23h B1h <ID1> <ID2> 02h 07h <DATA01> <CKS>
Data part
Item Description
DATA01 Execution result
00h Ended successfully.
01h Ended with an error.
When the command fails
A3h B1h <ID1> <ID2> 02h <ERR1> <ERR2> <CKS>
To Next Page
Loading...
Need help?
General
