©NEC Display Solutions, Ltd. 2014-2020 34
3.17 [ 037-4. LAMP INFORMATION REQUEST 3 ]
Gets lamp usage information such as usage time or remaining life. When the eco mode is enabled, the values in the
obtained information reflect the eco mode.
Command
03h 96h 00h 00h 02h <DATA01> <DATA02> <CKS>
Data part
Item Description
DATA01 Target
00h Lamp 1
01h Lamp 2
DATA02 Content
01h Lamp usage time (seconds)
04h Lamp remaining life (%)
Information
"01h" (Lamp 2) in DATA01 is effective only for two-lamp projector models.
Command example
The following command gets the lamp usage time.
03h 96h 00h 00h 02h 00h 01h 9Ch
To Next Page
Loading...
Need help?
General
