Issue 4.0 UNIVERGE SV8100
3 - 70
22-01-11 System Options for Incoming Calls – VRS Waiting Message Interval
Time
Set the timer for the interval between the Delayed Messages (0~64800
seconds).
With a In-Mail set as the announcement source:
41-19-01 ACD Voice Mail Delay Announcement – Delay Message Start Time
For each ACD Group (01~64), set how long the system waits before playing
the first Delay Announcement (0~64800 seconds).
41-19-02 ACD Voice Mail Delay Announcement – Mailbox Number for 1st
Announcement Message
For each ACD Group (01~64), set the mailbox number to be used for the
1st Delay Announcement.
41-19-03 ACD Voice Mail Delay Announcement – 1st Delay Message Sending
Count
For each ACD Group (01~64), determine how many times the 1st Delay
Message is played to the caller (0~255).
41-19-04 ACD Voice Mail Delay Announcement – Mailbox Number for 2nd
Announcement Message
For each ACD Group (01~64), set the mailbox number to be used for the
2nd Delay Announcement.
41-19-05 ACD Voice Mail Delay Announcement – 2nd Delay Message Sending
Count
For each ACD Group (01~64), determine how many times the 2nd Delay
Message is played to the caller (0~255).
41-19-07 ACD Voice Mail Delay Announcement – ACD Forced Disconnect Time
After 2nd Announcement
For each ACD Group (01~64), assign how long the system should wait after
the end of the 2nd Announcement Message before disconnecting the call
(0~64800 seconds).
41-19-08 ACD Voice Mail Delay Announcement – Delay Message Interval Time
For each ACD Group (01~64), set the timer for the interval between the
Delayed Messages (0~64800 seconds).
To Next Page
Loading...
