NEC Univerge SV9500 - Page 108

100
STEP 5: Choose a protocol used by the server which
stores the backup file.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press or , and press or OK.
STEP 6: The display goes back to the Backup/Re-
store screen.
When FTP is chosen here, go to the next
Step (STEP 7).
When TFTP is chosen here, go to the
next STEP 15.
STEP 7: Select FTP Settings.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 8: Select User ID.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
STEP 9: Enter a User ID.
Enter a User ID by using digit keys, then press
or OK.
1
2
1
2
OK
Back

1/1
FTP
TFTP
[Protocol]
1
2
5
5
OK
Back
1/1
1
2
3
4
Server Address
Protocol

[Backup/Restore]
5
FTP Settings
Data Backup
Data Restore
1
1

Back
OK
1
2
[FTP Settings]
3
1/1
Password
Folder
User ID