NEC Univerge SV9500 - Page 107

99
• TO RESTORE PERSONAL SETTINGS
User can restore the personal settings of DT830G. To
download the backup file to the telephone, the DT830G
needs to be connected to the network that has FTP
(TFTP server).
Before starting the download, the IP Address of the
FTP/TFTP Server must be entered from DT830G.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Put the backup file you want to restore into
the designated directory (for Windows IIS,
the default is “C:\InetPub\ftproot) of the FTP
server.
<TFTP server>
Put the backup file you want to restore into a
desired directory of TFTP server and specify
it as the directory for downloading.
STEP 2: Display the Menu screen, and select Setting.
STEP 3: Select Data Backup/Restore.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 4: Select Protocol.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
Note
For details on the XML service, contact the System
Administrator.
3
3
Menu
OK
1
2
[Setting]
3
User Setting
1/1

Download
Data Backup/Restore
4
4

Back
OK
1
2
3
1/1

4
Data Backup
Data Restore
Server Address
FTP Settings
Protocol
5
[Backup/Restore]