221
• To switch the terminal mode
When the Bluetooth
connection between DT830G
and a mobile phone is completed, you can switch
the terminal mode (“Wired Telephone” mode/“Mo-
bile Phone” mode) by pressing the Path key.
The Path key indicates the mode status with the
lamp color and the flashing status. When the Path
key lights or flashes orange, the terminal is in Wired
Telephone mode. When Path key lights or flashes
green, the terminal is in Mobile Phone Mode.
For details of the Path key lamp status, see the ta-
ble below.
The flashing periods of Path key are as follows.
Lamp
Indication
Patterns
Flashing
Periods
Mode Status
Lighting
Orange
-
Wired
Telepho
ne Mode
Indicates that the mobile
phone is idle or not
connected.
Flashing
Orange
Slow
Light
Wired
Telepho
ne Mode
Indicates that the mobile
phone is originating a call
or terminal is talking
through the DT terminal.
Flash
Indicates that the mobile
phone is playing music.
Quick
Flash
Indicates that you are
talking on your mobile
phone.
Burst
Flash
Indicates that the mobile
phone is ringing.
Lighting
Green
-
Mobile
Phone
Mode
Indicates that the
terminal is idle on the
system line or ringing.
Flashing
Green
Quick
Flash
Mobile
Phone
Mode
Indicates that the
terminal is talking
through the system line.
Lamp
Indication
Patterns
Flashing
Periods
Mode Status
0ms 500ms 1000ms
Flashing
Periods
Slow
Light
Flash
Quick
Flash
Burst
Flash
250ms 750ms
Light
To Next Page
Loading...
