NEC Univerge SV9500 - Page 54

46
• TO ENABLE/DISABLE RTP ALARM
The procedure below shows how to enable/disable
RTP alarm.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 3: Select Talk.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 4: Select RTP Alarm.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
2
2
OK
Back
1/1
[User Setting]
1
2
3
4
5
6

Display
Change Password
Peripherals
Security
Incoming Call
Talk

7
Usability
1
1

Back
OK
1/1
[Talk]
1
2
3
4
5
DTMF Tone
Key Touch Tone
Hold Music
Prefix
RTP Alarm